News:

SKS-FILES exclusive announcement!!  The SKS-Files Comprehensive Chinese SKS Survey V2.0 is open to new entries.  Enter your Chinese type 56 HERE!

Main Menu

Newby from Delaware...

Started by wpage, April 30, 2026, 02:13:20 PM

Previous topic - Next topic

1 Member and 4 Guests are viewing this topic.

Print
Go Down Pages 1 2
User actions

echo1

#20
May 05, 2026, 11:19:26 AM
Welcome from Kali, don't cut chit, PAX
  You need a crew  

"A free people ought not only be armed and disciplined" (George Washington),
But they should have sufficient arms and ammunition to maintain a status of Independence from any who might attempt to abuse them. echo1

Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.~John Adams 1798

Phosphorus32

#21
May 05, 2026, 06:10:21 PM
Given how far that unfired cartridge inserts, it appears that you just have the neck or a bit more than that stuck in the chamber.

If nothing above is working (always best to punch out from the muzzle end), then the next to last resort is the following:
Get it stripped down to the barreled action
Scrub it out with a chamber brush and penetrating oil, wipe "clean"
Shine a light in the chamber to see if you can see thee edges of the broken case
Using a BRASS chisel, punch, or empty fired 5.56 case, and a small hammer, get the edge of the chise/punch on the edge of the broken case and tap-tap-tap gently
The objective is to break an edge free of the chamber without driving it further up the throat, and then hitting it with penetrating oil again.


Print
Go Up Pages 1 2
User actions