Author Topic: Bedding input/advice for accurizing project.  (Read 76 times)

0 Members and 2 Guests are viewing this topic.

Online Boris Badinov

  • SKS-FILES CONTRIBUTOR
  • Trade Count: (0)
  • Marksman
  • *
  • Posts: 517
Bedding input/advice for accurizing project.
« on: November 24, 2018, 04:22:21 PM »
I've got a mismatched, and bubba'd type56  selected for an accurizing project. The plan is to glass bed the stock inletting, and free float the barrel. If these mods produce favorable  results, the final modification will be the addition of  PU style mount and scope (Accumounts).

Rgarding the glass bedding:

How much material  needs to  removed from  stock inletting before it can be glass bedded?


I have a stock selcted for the project. But the receiver fit is extremely tight. So tight that I have use a dowel and mallot to free the receiver from the stock.

Thanks,
BorisB







Offline Loose}{Cannon

  • Administrator
  • Trade Count: (+16)
  • Sniper
  • *
  • Posts: I am a geek!!
  • Constitutional Extremist
Re: Bedding input/advice for accurizing project.
« Reply #1 on: November 24, 2018, 08:56:57 PM »










































      
1776 will commence again if you try to take our firearms... It doesn't matter how many Lenins you get out on the street begging for them to be taken.

Online Boris Badinov

  • SKS-FILES CONTRIBUTOR
  • Trade Count: (0)
  • Marksman
  • *
  • Posts: 517
Re: Bedding input/advice for accurizing project.
« Reply #2 on: November 26, 2018, 09:36:20 AM »
Quite an interesting specimen. Is it yours? Is it finished?
What kind of groups does it produce? What about distances? Any optics?

For now, pillar bedding is beyond my interest and even further outside of my capabilities.  Same goes for the custom stock. So glass bedding, free floating  and the PU optic are my best options for optimizing accuracy.
(Lasix is also another modification I'm considering, heh heh)

Are there any forum links for that project?

Any advice about glass bedding?


Offline Loose}{Cannon

  • Administrator
  • Trade Count: (+16)
  • Sniper
  • *
  • Posts: I am a geek!!
  • Constitutional Extremist
Re: Bedding input/advice for accurizing project.
« Reply #3 on: November 26, 2018, 10:29:33 AM »
https://www.thefirearmblog.com/blog/2015/07/10/1moa-sks/

Use the product I shown a picture of.  Remove enough stock material so that the action is loose. Your creating a NEW surface with the bedding that fits the action like a glove.
      
1776 will commence again if you try to take our firearms... It doesn't matter how many Lenins you get out on the street begging for them to be taken.

Online echo1

  • Trade Count: (+1)
  • Rifleman
  • *
  • Posts: 215
  • Death from above
Re: Bedding input/advice for accurizing project.
« Reply #4 on: November 27, 2018, 12:50:14 AM »
Great work LC. Should  have done a time lapse of the works progression  8) PAX
  You need a crew  

"A free people ought not only be armed and disciplined" (George Washington),
But they should have sufficient arms and ammunition to maintain a status of Independence from any who might attempt to abuse them. echo1

Our Constitution was made only for a moral and religious people. It is wholly inadequate to the government of any other.~John Adams 1798

Online Boris Badinov

  • SKS-FILES CONTRIBUTOR
  • Trade Count: (0)
  • Marksman
  • *
  • Posts: 517
Re: Bedding input/advice for accurizing project.
« Reply #5 on: November 27, 2018, 07:23:10 PM »
Have to admit, that is a really cool final product.  Have you taken it out past 500 yds?

Offline Loose}{Cannon

  • Administrator
  • Trade Count: (+16)
  • Sniper
  • *
  • Posts: I am a geek!!
  • Constitutional Extremist
Re: Bedding input/advice for accurizing project.
« Reply #6 on: November 28, 2018, 11:56:19 PM »
Thanx pax....

500y.    :))
      
1776 will commence again if you try to take our firearms... It doesn't matter how many Lenins you get out on the street begging for them to be taken.