SKS-FILES FORUM

Commercial Weapons => Shotguns => Topic started by: sksmcrossvilletn on March 26, 2020, 06:25:23 AM

Title: 1Mossberg 500 20 gauge persuader
Post by: sksmcrossvilletn on March 26, 2020, 06:25:23 AM
My bedside defense gun.

Mossberg 500 20 gauge persuader 8 shot 20" barrel.
Elzetta ZSM light mount
Energizer 700 lumen aluminum light
Browncoat tactical 7 round shotgun cards
Soe gear single point sling
It also has a 2 point sling that goes with it. It's a quake industries the claw padded sling in mossy oak bottom land.
Limbsaver air tech pad for the fiance
Magpul sga stock
Tacstar aluminum side plate with rubber on the back side and velcro on the front.
NDZ performance red aluminum follower
NDZ performance safety in fde cerakote
Mossberg factory trigger fde cerakote
Mcarbo spring kit for the trigger.  (I've had no issues with these kits and recommend them to everyone.)

The gun is painted in kg kphos which is a phosphate like parkerizing and then kg gunkoted milspec od green and then baked.

It was done by xdman in Alabama aka James Nicholas

The furniture was painted in magpul fde kg gunkote and baked.

(https://i.ibb.co/w6Ykm49/20200312-060521.jpg)

(https://i.ibb.co/3MDyYqM/20200312-060456.jpg)

(https://i.ibb.co/x3KCCmQ/20200312-061639.jpg)

(https://i.ibb.co/CtSfSWd/20200312-061618.jpg)
Title: Re: 1Mossberg 500 20 gauge persuader
Post by: sksmcrossvilletn on March 26, 2020, 06:30:49 AM

(https://i.ibb.co/3kYgbZZ/received-153008155877432.jpg)

I put me a punisher logo on it.
Title: Re: 1Mossberg 500 20 gauge persuader
Post by: carls sks on March 26, 2020, 09:45:43 AM
can't beat a shotgun for home defense. want a shockwave for under my bed. maybe after all this craziest stuff.
Title: Re: 1Mossberg 500 20 gauge persuader
Post by: echo83 on April 07, 2020, 06:32:49 PM
Solid looking set up. I'm a big fan of shotgun cards. I have a few 5 round ones from SKD tactical, and I mounted one on the receiver of my Mossberg 500, just like yours.

How do you like that Elzetta mount?
Title: Re: 1Mossberg 500 20 gauge persuader
Post by: sksmcrossvilletn on April 08, 2020, 12:21:32 AM
Solid looking set up. I'm a big fan of shotgun cards. I have a few 5 round ones from SKD tactical, and I mounted one on the receiver of my Mossberg 500, just like yours.

How do you like that Elzetta mount?

I don't it moves under recoil. I've used antivibration loctite on the screws and rubber pieces to try and keep it from sliding. All a no go.
Title: Re: 1Mossberg 500 20 gauge persuader
Post by: echo83 on April 08, 2020, 07:36:08 AM
Solid looking set up. I'm a big fan of shotgun cards. I have a few 5 round ones from SKD tactical, and I mounted one on the receiver of my Mossberg 500, just like yours.

How do you like that Elzetta mount?

I don't it moves under recoil. I've used antivibration loctite on the screws and rubber pieces to try and keep it from sliding. All a no go.

Bummer. I've been looking for a low-cost, quick-detach light mount and light. I use my shotgun for trap shooting, but it wears a shorter barrel at home, hence the need for a removable mount.
 
If you have trouble with that mount on a 20 gauge, it would probably get rocked on my 12 gauge.

Title: Re: 1Mossberg 500 20 gauge persuader
Post by: sksmcrossvilletn on April 08, 2020, 08:36:01 PM
Solid looking set up. I'm a big fan of shotgun cards. I have a few 5 round ones from SKD tactical, and I mounted one on the receiver of my Mossberg 500, just like yours.

How do you like that Elzetta mount?

I don't it moves under recoil. I've used antivibration loctite on the screws and rubber pieces to try and keep it from sliding. All a no go.

Bummer. I've been looking for a low-cost, quick-detach light mount and light. I use my shotgun for trap shooting, but it wears a shorter barrel at home, hence the need for a removable mount.
 
If you have trouble with that mount on a 20 gauge, it would probably get rocked on my 12 gauge.

Yeah I followed the elzetta directions to a tee and used the proper 20 gauge adapter to get it to fit. Used the rubber pieces in the shims like they said and like I said used the anti vibration loctited with no luck. The only thing I haven't tried is red loctite but I want to be able to remove the elzetta for cleaning.
Title: Re: 1Mossberg 500 20 gauge persuader
Post by: ffjoey on June 14, 2020, 09:01:35 PM
Looks good
Title: Re: 1Mossberg 500 20 gauge persuader
Post by: Bob_The_Student on June 14, 2020, 09:32:17 PM
That's real nice. Someone going to have a bad day/night if you have to defend your family/home with it.
Title: Re: 1Mossberg 500 20 gauge persuader
Post by: Larry D. on June 15, 2020, 09:24:59 AM
I'm a fan of the 20ga.

I find that at most practical distances, it'll to anything a 12ga will do.
Title: Re: 1Mossberg 500 20 gauge persuader
Post by: sksmcrossvilletn on June 23, 2020, 07:52:10 AM
I'm a fan of the 20ga.

I find that at most practical distances, it'll to anything a 12ga will do.

#3 buck has pretty much the same ballistics as a .44 magnum I've heard.
Title: Re: 1Mossberg 500 20 gauge persuader
Post by: Bubbazinetti on June 23, 2020, 01:51:22 PM
Did you add the stock on or was it factory oem equiped with the Magpul SGA?What is the L.O.P. on it?Is it a youth stock with spacers or a standard that you can shorten for her?
Title: Re: 1Mossberg 500 20 gauge persuader
Post by: ffjoey on June 24, 2020, 02:57:21 PM
Should be worth about $1k right now. Lol.