SKS-FILES FORUM

SKS Carbines => Altered SKS Rifles => General Discussion => Topic started by: Jgross2005 on February 25, 2020, 04:47:08 AM

Title: Chinese Norinco SKS identification
Post by: Jgross2005 on February 25, 2020, 04:47:08 AM
Anybody help me identify the yr and model of this Chinese norinco I bought. New to the sks. Thanks.
(https://i.ibb.co/tBW7Cz2/IMG-20200221-095020.jpg) (https://ibb.co/JnMfkqp)

(https://i.ibb.co/HK7rVtf/IMG-20200222-103533.jpg) (https://ibb.co/YN2t3cF)

(https://i.ibb.co/FgpYHB8/IMG-20200222-103456.jpg) (https://ibb.co/72hpkGr)

(https://i.ibb.co/zh1tNvV/IMG-20200222-103500.jpg) (https://ibb.co/gMGc6KZ)

photo hosting sites (https://imgbb.com/)

(https://i.ibb.co/DYs0YTH/IMG-20200222-103541.jpg) (https://ibb.co/7Q8sQLd)
Title: Re: Chinese Norinco SKS identification
Post by: Justin Hell on February 25, 2020, 08:34:18 AM
Its a DB series....there is little known about them that is based in fact...but we sure do speculate about them. :P

The Chinese character is likely either the city where it was made, or perhaps the city it was issued to.

There is a section in the guide on DBs and DPs that has the city code characters translated....in the Arsenal Stamps section.
Yours appears to be from Lushun City. (pardon me if I am wrong, but it is upside down and early in the AM)

The stock, bipod, magazine and muzzle brake are all aftermarket addons.

Dating these is virtually impossible based on the serial, usually...but for the most part the ones with indicators towards the date point to 70-71ish.

http://chinesesks.weebly.com/arsenal-stamps.html

you can also join the fun here:
https://sks-files.com/index.php?topic=1002.0;topicseen
Title: Re: Chinese Norinco SKS identification
Post by: Larry D. on February 25, 2020, 09:57:11 AM
Hi Jgross.
Welcome from Arizona.

You are definitely in the right place to learn the truth about the SKS.
Title: Re: Chinese Norinco SKS identification
Post by: astronut on February 25, 2020, 10:24:37 AM
Welcome to the forum Jgross!  As Larry D has said, this is the best place to find info on the SKS rifle!
Title: Re: Chinese Norinco SKS identification
Post by: Phosphorus32 on February 25, 2020, 11:09:40 AM
It's a Type 56 DB likely made at Lüshun City (present day Dalian, formerly Port Arthur) based on the Hanzi character after the DB. It was made in the early to mid 70's but the DB/DP series Type 56s are some of the few for which a precise year of production code has not been determined.

A very long and ongoing discussion on the DB/DP guns can be found on the thread below:

https://sks-files.com/index.php?topic=1002.0
Title: Re: Chinese Norinco SKS identification
Post by: running-man on February 25, 2020, 11:10:37 AM
Nice!

I agree with Justin, Lushun City mark.  S/N is higher than the up to 44k 48k block I've seen with 5 digits.  Other S/N's are definitely scrubbed (see attached photos)...your's may be too but it's impossible to tell with it in the stock.  The feature set would determine whether this is a newer build or a scrub of an older gun.  Would need to see photos of the right side bolt carrier, gas tube, front sight block, barrel lug, etc. to go further than that.

(https://i.ibb.co/K5wC5hK/45795-receiver.jpg)
(https://i.ibb.co/LSvV49v/48521-receiver.jpg)
(https://i.ibb.co/2MpNDwm/44450-receiver2.jpg)
Title: Re: Chinese Norinco SKS identification
Post by: carls sks on February 25, 2020, 05:01:58 PM
hi JG and welcome. good to have you here.  thumb1
Title: Re: Chinese Norinco SKS identification
Post by: Bacarnal on February 26, 2020, 08:26:59 AM
Welcome, JG, from Kentucky!!