SKS-FILES FORUM

SKS Carbines => Altered SKS Rifles => General Discussion => Topic started by: Randy on January 23, 2020, 09:15:46 PM

Title: I 'bubba'd' it! I'm soo embarrassed!
Post by: Randy on January 23, 2020, 09:15:46 PM
Yup, A long time ago when Yugo's were selling cheap I got a really nice forced matched 59/66A1. Near new looking with a few stock dings but little else wrong with it. I cleaned most of the cosmo off and lightly sanded the stock and re-oiled it with linseed.

But the real bubba massacree happened when an ignorant (me) decided he didn't like the grenade launcher on it. So, drill, file, and punches in hand I proceeded to remove, without any grace or dignity, the grenade launcher with the rifle laying safely in my lap.  ???

Obviously....it didn't go good.

As an old guy that spent years working in and fabricating in the construction trades I can do the dumbest things and drilling hardened steel in my lap was right up there!

And now, after joining this forum (again?) I see the error (the too late to return to the party error) of my ways.

Idle hands are the devils workshop, is what my Grandmother used to say to me all the time.

So the devil made me do it!  :))

I can't post pictures right now because I had a major malfunction dealing with some pictures in cloud storage and it ate all my data allowance for this month. I connect with my cell phone so I have a finite amount of data before they slow me down to KBs. Right now speedtest is telling me I'm getting a 39ms pingback, a download of .79Mbps, and an upload of .58Mbps. I can run this to you faster.
Title: Re: I 'bubba'd' it! I'm soo embarrassed!
Post by: Phosphorus32 on January 23, 2020, 10:30:01 PM
Well penitence is the first step to absolution. Say "I'm sorry Simonov" thirty times and sell that neutered Yugoslavian to a New York or California resident where they've outlawed those dangerous 22.5mm spigots  rofl
Title: Re: I 'bubba'd' it! I'm soo embarrassed!
Post by: Randy on January 23, 2020, 10:52:06 PM
 rofl thumb1

Good enough...

One thing I did find out about the Yugo. I did not want to make the duck bill mags work in the type 56 I just got but they snapped right into the Yugo with lot's of room left over in the front. They were the cheap metal ones ($19.99ea) from Classic. It took a lot of filing to get just one to feed from a stripper clip. A lot of time assembling and disassembling just one of them to get the follower to work somewhat correctly, and even longer to come to the widely realized conclusion that it's just not worth it.
Title: Re: I 'bubba'd' it! I'm soo embarrassed!
Post by: Greasemonkey on January 23, 2020, 11:20:57 PM
Confession is good.. it cleanses an impure soul.. now, dont fall off the damn wagon again, for the demons will come for thee fart1 Only bubba prebubbaed stuffs..
Title: Re: I 'bubba'd' it! I'm soo embarrassed!
Post by: Larry D. on January 24, 2020, 12:07:46 PM
Testify brothers.

Amen!
Title: Re: I 'bubba'd' it! I'm soo embarrassed!
Post by: echo1 on January 24, 2020, 01:14:45 PM
Quote from: Greasemonkey on January 23, 2020, 11:20:57 PM
Confession is good.. it cleanses an impure soul.. now, dont fall off the damn wagon again, for the demons will come for thee fart1 Only bubba prebubbaed stuffs..

^^^This, or mismatched Chinese or SARCO barreled actions.  8) PAX
Title: Re: I 'bubba'd' it! I'm soo embarrassed!
Post by: astronut on January 24, 2020, 01:40:42 PM
"Forgive me for I have sinned."   :)
Title: Re: I 'bubba'd' it! I'm soo embarrassed!
Post by: Larry D. on January 24, 2020, 05:20:10 PM
Quote from: astronut on January 24, 2020, 01:40:42 PM
"Forgive me Father Simonov, for I have sinned."   :)

I dun fixted it fer ya.
Title: Re: I 'bubba'd' it! I'm soo embarrassed!
Post by: Randy on January 24, 2020, 06:17:09 PM
But really, if I get the launcher polished and reblued will that help mitigate my sin? Or will I actually have to weld that fugly thing back on?  :-\
(https://i.ibb.co/TcdNknQ/KIMG0978.jpg) (https://ibb.co/mJgPGYn)

(https://i.ibb.co/dW4kRYv/KIMG0979.jpg) (https://ibb.co/ZLzc0Dr)
Title: Re: I 'bubba'd' it! I'm soo embarrassed!
Post by: astronut on January 24, 2020, 06:49:49 PM
Quote from: Larry D. on January 24, 2020, 05:20:10 PM
Quote from: astronut on January 24, 2020, 01:40:42 PM
"Forgive me Father Simonov, for I have sinned."   :)

I dun fixted it fer ya.
I and it was not broke.  No fixing needed!   rofl
Title: Re: I 'bubba'd' it! I'm soo embarrassed!
Post by: astronut on January 24, 2020, 06:52:05 PM
Quote from: Randy on January 24, 2020, 06:17:09 PM
But really, if I get the launcher polished and reblued will that erase my sin? Or will I actually have to weld that fugly thing back on?  :-\
No, you are doomed forever to drive a "party bus" the rest of your life!   rofl
Title: Re: I 'bubba'd' it! I'm soo embarrassed!
Post by: Randy on January 24, 2020, 07:00:39 PM
I can only hope my life is as short as my attention span...

WTF where we talking about? bat1
Title: Re: I 'bubba'd' it! I'm soo embarrassed!
Post by: astronut on January 24, 2020, 07:24:57 PM
Quote from: Randy on January 24, 2020, 07:00:39 PM
I can only hope my life is as short as my attention span...

WTF where we talking about? bat1
The wheels on the bus goes round and round, round and round.  You are a slow learner!   rofl
https://www.youtube.com/watch?v=e_04ZrNroTo
Title: Re: I 'bubba'd' it! I'm soo embarrassed!
Post by: Randy on January 24, 2020, 09:29:26 PM
My Yugo as best as I can get till it warms up.


(https://i.ibb.co/Ycp3TpL/KIMG0959.jpg) (https://ibb.co/y6WXBWQ)

(https://i.ibb.co/xqy21cf/KIMG0960.jpg) (https://ibb.co/fdbXkKn)

(https://i.ibb.co/QfgMs6K/KIMG0961.jpg) (https://ibb.co/FKrzGBD)

(https://i.ibb.co/vD2prtw/KIMG0962.jpg) (https://ibb.co/b7pTyfW)

(https://i.ibb.co/YQHbrWn/KIMG0963.jpg) (https://ibb.co/sR8tBPx)

(https://i.ibb.co/MNTg2hz/KIMG0964.jpg) (https://ibb.co/bdh6W34)

(https://i.ibb.co/jHbgY8x/KIMG0965.jpg) (https://ibb.co/CWmhywX)

(https://i.ibb.co/hspP4B2/KIMG0966-Copy.jpg) (https://ibb.co/Y2vz1cf)

(https://i.ibb.co/CzdwXrJ/KIMG0967-Copy.jpg) (https://ibb.co/ZVsfwZH)

(https://i.ibb.co/V94V57D/KIMG0969-Copy.jpg) (https://ibb.co/ZXDd7nK)

(https://i.ibb.co/bQ2mwJg/KIMG0970-Copy.jpg) (https://ibb.co/MZGSw6D)

(https://i.ibb.co/NWHNnjW/KIMG0971-Copy.jpg) (https://ibb.co/ssM1Jws)

(https://i.ibb.co/VmJpjN6/KIMG0972-Copy.jpg) (https://ibb.co/FVmqxWp)

(https://i.ibb.co/dJy6Dx4/KIMG0973-Copy.jpg) (https://ibb.co/tP5cDFp)

(https://i.ibb.co/JBCvMNy/KIMG0974-Copy.jpg) (https://ibb.co/Tvr4FZb)

(https://i.ibb.co/SfNp9yt/KIMG0975-Copy.jpg) (https://ibb.co/5KTVf4r)

(https://i.ibb.co/PhfjhXd/KIMG0976-Copy.jpg) (https://ibb.co/Hzk4zwj)

This is the inside piece of the mag box. >I can't make out the script.

(https://i.ibb.co/10n6cs8/KIMG0977-Copy.jpg) (https://ibb.co/PrYQkTw)