Back on the little Para. I dug out my scopage set-ups to see which way I'd go. I've got a T89 base, but it would require additional holes, dimensionally it's all wrong, too short. I took off my other "no-where-rail" and modded it to fit a T89 and Redstar, then pulled it for a CC resto. So to go that route would be $pendy for a T89, and they're kind of a compromise to use. Then there's a Tasco aluminum shot gun base, mount & rings affair that is perfect for fitting and sizing to the existing holes and stock cut out, also it's the cheapest and lightest. That will require turning loose the Khyber Pass Fab Team and busting out the mic, band saw, drill press & Dremel. So....I dug a little deeper into the SKS stash and found a great interim solution. I'll clone a KSI Stealth Para using a Ramline stock with correct HG, and since the donor rifle has the rail holes tapped, I'll just put Allen screws in and let the stock hide the blemish. I did a faux Parka Para with an OD K-Sport branded Butler Creek I got from GG. Both were KSI builds anyway. It'll be boss.
Money back guarantee
PAX