Author Topic: 7.62x39 Stripper Clips in Ammo Can  (Read 8716 times)

0 Members and 1 Guest are viewing this topic.

Offline rjinga

  • Trade Count: (0)
  • Cadet
  • *
  • Posts: 48
7.62x39 Stripper Clips in Ammo Can
« on: November 01, 2017, 06:57:27 PM »
For anyone who didn't know already:  40 loaded 10-round 7.62x39 stripper clips will fit neatly into the standard 30 cal. ammo can.



Two cans = 800 rounds.  (Each can weighs in at 19.4 lbs)

Offline Phosphorus32

  • Administrator
  • Trade Count: (+13)
  • Sniper
  • *
  • Posts: 6796
  • Send lawyers guns and money...uh, skip the lawyers
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #1 on: November 01, 2017, 07:01:58 PM »
Interesting. If they're in the original 40 round boxes of M67 on stripper clips from Yugoslavia, you can fit 16 boxes (640 rounds) per can.

Offline rjinga

  • Trade Count: (0)
  • Cadet
  • *
  • Posts: 48
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #2 on: November 01, 2017, 07:12:28 PM »
Interesting. If they're in the original 40 round boxes of M67 on stripper clips from Yugoslavia, you can fit 16 boxes (640 rounds) per can.

In the regular, skinny 30 cal. ammo can?  That must be some serious packing then.

Offline Phosphorus32

  • Administrator
  • Trade Count: (+13)
  • Sniper
  • *
  • Posts: 6796
  • Send lawyers guns and money...uh, skip the lawyers
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #3 on: November 01, 2017, 07:21:17 PM »
Interesting. If they're in the original 40 round boxes of M67 on stripper clips from Yugoslavia, you can fit 16 boxes (640 rounds) per can.

In the regular, skinny 30 cal. ammo can?  That must be some serious packing then.

 :o chuckles1  I misread. My numbers were for a standard .50 cal can  :-[
« Last Edit: November 01, 2017, 07:32:45 PM by Phosphorus32 »

Offline carls sks

  • Location: Culpeper, Virginia
  • Trade Count: (0)
  • Sharp-Shooter
  • *
  • Posts: 1420
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #4 on: November 01, 2017, 07:26:00 PM »
 hate to remove them  (or any of my ammo) from original packaging.  :o but good to know , thanks for sharing.  thumb1
ARMY NAM VET, SO PROUD!

Offline rjinga

  • Trade Count: (0)
  • Cadet
  • *
  • Posts: 48
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #5 on: November 01, 2017, 09:42:18 PM »
hate to remove them  (or any of my ammo) from original packaging.  :o but good to know , thanks for sharing.  thumb1

You're welcome.  And, in my case, I had boxed ammunition (20 rounds each).  So, I'd either have to load them one at a time into the mag, or put them on stripper clips anyway.  I got 28 stripper clips when I bought the rifle; I got 70 more today in the mail.

Offline newchi

  • Trade Count: (0)
  • Marksman
  • *
  • Posts: 640
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #6 on: November 01, 2017, 09:49:41 PM »
Quote
I got 28 stripper clips when I bought the rifle; I got 70 more today in the mail.
Good ones i hope.

Offline rjinga

  • Trade Count: (0)
  • Cadet
  • *
  • Posts: 48
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #7 on: November 01, 2017, 09:51:24 PM »

 :o chuckles1  I misread. My numbers were for a standard .50 cal can  :-[

I wondered if maybe you were thinking .50 cal.   :)

Offline rjinga

  • Trade Count: (0)
  • Cadet
  • *
  • Posts: 48
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #8 on: November 01, 2017, 09:52:25 PM »
Quote
I got 28 stripper clips when I bought the rifle; I got 70 more today in the mail.
Good ones i hope.

BXN

Offline MxwllBkr

  • SKS-FILES CONTRIBUTOR
  • Trade Count: (+3)
  • Rifleman
  • *
  • Posts: 210
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #9 on: November 01, 2017, 10:02:24 PM »
You can also fit 1000 rounds of Golden Tiger still in they're boxes into a .50 cal can....

Offline running-man

  • Administrator
  • Trade Count: (+5)
  • Sniper
  • *
  • Posts: 6855
  • The only way to avoid Mosin #2 is avoid Mosin #1!
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #10 on: November 01, 2017, 10:27:06 PM »
Sounds like you're ready for a little shootin'!  thumb1

This is good to know.  I usually keep my ammo in the boxes it comes in unless I'm planning on using it within the week, then I'll load strippers or repack it. 
      

Offline rjinga

  • Trade Count: (0)
  • Cadet
  • *
  • Posts: 48
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #11 on: November 01, 2017, 11:21:27 PM »
Sounds like you're ready for a little shootin'!  thumb1

Yep.  At the rate I've been shooting, those two cans would last me about eight range trips.

This is good to know.  I usually keep my ammo in the boxes it comes in unless I'm planning on using it within the week, then I'll load strippers or repack it.

I guess I'm kinda planning for the unplanned.   ;)

Offline running-man

  • Administrator
  • Trade Count: (+5)
  • Sniper
  • *
  • Posts: 6855
  • The only way to avoid Mosin #2 is avoid Mosin #1!
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #12 on: November 01, 2017, 11:29:11 PM »
Heh, unplanned is what the factory sealed Yugo m67 tins that are strewn about and under my place are for! Already on strippers and ready at a moment's notice!  :P

The rest is just cheap plinking ammo!  :))
      

Offline newchi

  • Trade Count: (0)
  • Marksman
  • *
  • Posts: 640
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #13 on: November 02, 2017, 12:05:45 AM »
Quote
I guess I'm kinda planning for the unplanned.   ;)
Thats why i have a full 9 pouch chest rig ready to go in a mtm ammo can wacko1

Offline Loose}{Cannon

  • Administrator
  • Trade Count: (+16)
  • Sniper
  • *
  • Posts: I am a geek!!
  • Constitutional Extremist
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #14 on: November 02, 2017, 10:04:05 AM »
Think I have maybe 1 stripper per sks....  I been using the flip rifle upside down and toss em in thar trick.   :P
      
1776 will commence again if you try to take our firearms... It doesn't matter how many Lenins you get out on the street begging for them to be taken.

Offline rjinga

  • Trade Count: (0)
  • Cadet
  • *
  • Posts: 48
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #15 on: November 03, 2017, 03:25:35 AM »
And...



24 boxes (480 rounds) will fit in a Plano .30 cal box (#131200).  However, except for the clasp, everything else is plastic.  So, at 18.8 lbs, I'm not sure how much I'd trust the handle under heavy/harsh use.  I do think they'll be fine for static storage though.

Offline bbush44

  • SKS-FILES CONTRIBUTOR
  • Trade Count: (+4)
  • Marksman
  • *
  • Posts: 477
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #16 on: November 03, 2017, 10:03:04 AM »
A friend's house flooded, several ammo cans full of ammo were completely submerged for days. Once located all of the metal surplus cans continents were dry, all the the plastic cans continents were soaked and a complete loss. I ditched all the plastic cans I had and replaced them with metal surplus cans. There isn't a huge cost savings in metal vs plastic.

Offline rjinga

  • Trade Count: (0)
  • Cadet
  • *
  • Posts: 48
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #17 on: November 03, 2017, 01:24:06 PM »
I ditched all the plastic cans I had and replaced them with metal surplus cans. There isn't a huge cost savings in metal vs plastic.

Those Plano boxes were quick purchases from Walmart when I didn't have any ammo containers at all.  Since then I've been buying metal ones.  However, the frugal person in me won't let me just get rid of them. 

Offline Greasemonkey

  • Professional foul mouth. Banned for life!! Certified Enabler
  • Administrator
  • Trade Count: (+14)
  • Sniper
  • *
  • Posts: I am a geek!!
  • The only way to avoid SKS #2, is avoid SKS #1!
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #18 on: November 03, 2017, 01:57:48 PM »
A 3 rd 81mm mortar can holds a crap ton of x39, especially loose... you will just need a hand cart to move it any distance  :) I have probably over 1k of 7.5 French boxed packed into one.

They measure 14.5 inchesx5.7 inchesx29.150 inches.
http://ammocanman.com/81mm-tall-surplus-ammo-can-grade-1/
I'm going to make him an offer he can't refuse......

Leave the gun, take the cannoli.

I said I was an addict........I didn't say I had a problem

Offline Phosphorus32

  • Administrator
  • Trade Count: (+13)
  • Sniper
  • *
  • Posts: 6796
  • Send lawyers guns and money...uh, skip the lawyers
Re: 7.62x39 Stripper Clips in Ammo Can
« Reply #19 on: November 03, 2017, 02:31:05 PM »
A 3 rd 81mm mortar can holds a crap ton of x39, especially loose... you will just need a hand cart to move it any distance  :) I have probably over 1k of 7.5 French boxed packed into one.

They measure 14.5 inchesx5.7 inchesx29.150 inches.
http://ammocanman.com/81mm-tall-surplus-ammo-can-grade-1/

I've got a few of the PA-120 40mm ammo cans (17.25" x 5.5" x 9.5") filled with the more common cartridges in my ammo dump that aren't in spam cans, crates, or original case sized boxes: 7..62x39, 7.62x54R, 7.92x57mm, and .303. They can be moved while full using the two side handles, but lift carefully  :o  Those mortar cans are definitely great for maximum static storage with minimal floor space.