SKS-FILES FORUM

Commercial Weapons => Hand Guns & Sub Guns => Topic started by: Greatguns on December 21, 2021, 05:38:34 PM

Title: H&R revolvers
Post by: Greatguns on December 21, 2021, 05:38:34 PM
So, I have an opportunity to trade a de-milled SKS parts kit(all one SN) on a barreled receiver(second SN) for $125 and an H&R Model 904 Target w/6" barrel. Basically placing the SKS at $525( threw it out there at $550 to start) and the H&R at $400. This revolver is a swing out 9 shot cylinder model and looks to be in pretty good condition. Also comes with 1 speed loader. Fair deal?

(https://i.ibb.co/YyrwjKT/IMG-2838.jpg) (https://imgbb.com/)

(https://i.ibb.co/Q9hBX8g/media0.jpg) (https://ibb.co/R2tn7hF)
Title: Re: H&R revolvers
Post by: Greasemonkey on December 21, 2021, 08:02:01 PM
On the revolver, check the lock up of the cylinder, if it's loose, just don't. nea1 They are fine little revolvers long as they aren't abused, dry fired and had gobs of minimags shoved thru them. I'm working on one myself, a 999 break open H&R and I have a 676 single action.   Last 904 I remember was $330ish, it was a really nice example.  No idea what today's prices run..
Title: Re: H&R revolvers
Post by: Greatguns on December 21, 2021, 08:10:00 PM
Yeah, I did a quick Completed sales search on GB and came up with a beater at $200-ish, one at $300-ish, and a nice one at $395.

Guy says he paid around $380-$400, but the speed loader adds around $25 I figure, maybe more. I like the 999 Sportsman they are the bomb, LOL.  What I really want is a Taurus Trakker 992 22LR/22WMR combo set.
Title: Re: H&R revolvers
Post by: Greasemonkey on December 21, 2021, 08:38:42 PM
Yeah, I did a quite Completed sales search on GB and came up with a beater at $200-ish, one at $300-ish, and a nice one at $395.

Guy says he paid around $380-$400, but the speed loader adds around $25 I figure, maybe more. I like the 999 Sportsman they are the bomb, LOL.  What I really want is a Taurus Trakker 992 22LR/22WMR combo set.


I have that Ruger Single Six interchangable 22lr/22wmr cylinder.. thrown in a safe somewhere.. didn't hit the spot. I have more fun with these things..

One day I'll get to posting these... rofl
(https://dl.dropboxusercontent.com/s/0htysa13a86dim2/noname%281%29a.jpeg?dl=0)
(https://dl.dropboxusercontent.com/s/eegwtgn5spip7e6/noname%282%29a.jpeg?dl=0)
Title: Re: H&R revolvers
Post by: echo1 on December 21, 2021, 10:07:25 PM
Yeah, I did a quick Completed sales search on GB and came up with a beater at $200-ish, one at $300-ish, and a nice one at $395.

Guy says he paid around $380-$400, but the speed loader adds around $25 I figure, maybe more. I like the 999 Sportsman they are the bomb, LOL.  What I really want is a Taurus Trakker 992 22LR/22WMR combo set.

I've got a Sportsman with a ribbed barrel too. They're really sweet. Decades ago, we were plinking at a muskrat with one. When I broke the action open, the cylinder jumped off and into the lake. We happened to have a snorkel and mask, but never did find the thing  :(. PAX
Title: Re: H&R revolvers
Post by: Greatguns on December 22, 2021, 10:15:02 AM
I decided I'm going to pass on it. Saved the image to my laptop and blew it up and it has some rust and pitting on the hammer and a few other areas. Think I'm going to hold out for a new Taurus Trakker 992 setup.
Title: Re: H&R revolvers
Post by: GuitarmanNick on December 23, 2021, 10:43:00 AM
I bought a 999 brand new around 1979. Lost the rear sight twice while at the range on consecutive trips. The second time was right after H&R had replaced the rear sight.

I purchased that model primarily because it had an adjustable rear sight. The problem was the design. It had two thin feet that were captured by Allen screws which also served to adjust the windage. Too little pressure and the sight falls out. Too much pressure and the feet beak off then the sight falls out.

Took it back to the gunsmith and H&R bought it back.
Title: Re: H&R revolvers
Post by: Greatguns on December 23, 2021, 11:30:06 AM
Sooooo, looks like I enabled myself. I was really going to pass on it, but the guy came back and offered a little more cash to seal the deal so I figured, at least I can go look at it. Don't know if it was the HD pic of he cleaned it after the pic, but it looked a lot nicer in person than in the pic. Locked up tight and came with a speed loader.
Yep, I ended up with it. I'll post up with pics when I get a chance.
Title: Re: H&R revolvers
Post by: Greasemonkey on December 23, 2021, 01:51:28 PM
Sooooo, looks like I enabled myself.

 rofl2 Self enabling..  dance2    GG.. I don't want it... GG's self... OH  BS!! you want it, you know you do.. just do it big fella..   end result.. uhm.. think1 OK...


Internal peer pressure..  clap1 chuckles1
Title: Re: H&R revolvers
Post by: Greatguns on December 23, 2021, 02:46:16 PM
Sooooo, looks like I enabled myself.

 rofl2 Self enabling..  dance2    GG.. I don't want it... GG's self... OH  BS!! you want it, you know you do.. just do it big fella..   end result.. uhm.. think1 OK...


Internal peer pressure..  clap1 chuckles1

Kind of like Golum/Smeagol on Lord of the Rings. I have this inner voice rofl rofl :o chuckles1