SKS-FILES FORUM

Miscellaneous => Scopes/Optics/Mounts/Peep Sights/etc => Topic started by: Hylander on July 30, 2023, 01:21:38 AM

Title: Where to get a PU scope and mount?
Post by: Hylander on July 30, 2023, 01:21:38 AM
I thinking of scoping an SKS and possibly using a PU setup.
Where to look for one, Not firefield.
Title: Re: Where to get a PU scope and mount?
Post by: BMont on August 02, 2023, 03:26:56 PM
I think you may be referring to the ON-2 Scope and Mount maybe for a yugo sniper?  Those are cammed correctly for the 7.62 round. 
Title: Re: Where to get a PU scope and mount?
Post by: Boris Badinov on August 02, 2023, 05:27:39 PM
Accumounts makes a PU replica mount and scope specifically for the SKS:


$199 for the mount

$499 for the mount and scope (all steel)

https://accumounts.com/sks.html
Title: Re: Where to get a PU scope and mount?
Post by: 1mlt on August 02, 2023, 06:54:16 PM
You want to scope a SKS wit RTZ
 here's how"Remove the dust receiver cover.
Mount your choice of rails by:
Draw (scribe) a center line on the cover.
Place the rail and mark your holes to be drilled.
Drill correct size hole to be tapped.
Tap the holes to fit the button head screws you choose.
Replace the rail and screw in the mounting screws. Lock tight in place.
Grind the screws off from the bottom side so they are flush with the curve of the cover. Needed so the bolt won't jam on them.

Remove the take down pin.
Replace the dust receiver cover. MUST be on for the tap threads to line up properly.
Tap (do not drill the hole) a 1/4-20 (or finer if you desire) hole all the way across and out the other side.
Use a grade 8, 1/4-20 x 1 3/4"L button head. MUST go all the way through and out the left side to anchor the cover.
Screw in the button head. Best if done right to left. Looks better in my opinion.
Cut to length, meaning flush with the receiver, cold blue and you are done.

Now you have a LOW mount, that will return to zero, every time you R/R it to clean your rifle.
Done this more than once, SO HAVE OTHERS HERE.
Happy Shooting
Marcus
Title: Re: Where to get a PU scope and mount?
Post by: Hylander on August 06, 2023, 12:01:10 AM
Picking up an Accumount PU set from a friend  :)

Also I have an extra dust cover, so I  am going mount a rail to it from a S&W 686.
That will be for different SKS