SKS-FILES FORUM
General Milsurp Weapons => Milsurp Rifles & Carbines => American Curios & Relics => Topic started by: Phosphorus32 on October 25, 2022, 02:39:15 PM
-
SP
Last of 11 that I needed. This and the Saginaw S’G’ were from the era of Italian MAP returns, based on the years on the CMP certificates.
(https://i.ibb.co/SBnSxPC/01-left-full.jpg) (https://ibb.co/jDMt5TX)
(https://i.ibb.co/6nrvbs9/02-left.jpg) (https://ibb.co/FxmsJ7Z)
(https://i.ibb.co/BfDsTrR/03-left.jpg) (https://ibb.co/K5ZyVLH)
(https://i.ibb.co/vXctGvX/04-left.jpg) (https://ibb.co/41FQGg1)
(https://i.ibb.co/NpHYFnj/05-left.jpg) (https://ibb.co/L62p0ht)
(https://i.ibb.co/RHnJx0h/06-right-full.jpg) (https://ibb.co/j4KjcMV)
(https://i.ibb.co/VQjgXYb/07-right.jpg) (https://ibb.co/LJkx4dB)
(https://i.ibb.co/khmCrhY/08-right.jpg) (https://ibb.co/qRJQ4Rb)
(https://i.ibb.co/NsJYYyH/09-right.jpg) (https://ibb.co/0c6JJGd)
(https://i.ibb.co/gtScyZ0/10-right.jpg) (https://ibb.co/frkTMd3)
(https://i.ibb.co/2h1W1zV/11-SN-2093864.jpg) (https://ibb.co/kBs5sLb)
(https://i.ibb.co/KsDbPPd/12-US-Carbine-Cal-30-M1.jpg) (https://ibb.co/4S2Kqqz)
(https://i.ibb.co/bbLRKXt/13-Barrel-Marlin.jpg) (https://ibb.co/sWQJVq7)
(https://i.ibb.co/Y8ZXsdg/14-CMP-SP-Cert.jpg) (https://ibb.co/1K6MWXc)
(https://i.ibb.co/NCrj08k/15-CMP-booklets.jpg) (https://ibb.co/2hStzDL)
(https://i.ibb.co/L8Wvvjh/17-stock-crossed-cannons.jpg) (https://ibb.co/2yQ55VY)
(https://i.ibb.co/TYSfQCn/16-stock-S-HB.jpg) (https://ibb.co/gmp20nX)
(https://i.ibb.co/y6Pg4X7/18-stock-466-bottom.jpg) (https://ibb.co/StyVfPG)
(https://i.ibb.co/6DVHmkj/19-stock-466-butt.jpg) (https://ibb.co/frBk2sj)
(https://i.ibb.co/xJsj8Td/20-handguard-S-HB.jpg) (https://ibb.co/18nqJWj)
(https://i.ibb.co/M6sTsgL/21-Bolt-group-disassembled.jpg) (https://ibb.co/rsmPmQJ)
(https://i.ibb.co/KGfbsxq/22-Bolt-group-lug-IU-2.jpg) (https://ibb.co/H2bBPTz)
(https://i.ibb.co/tDFybvz/23-Bolt-group-lug-X.jpg) (https://ibb.co/gJhsDfd)
(https://i.ibb.co/ggwcjvJ/24-Bolt-group-FP-SG.jpg) (https://ibb.co/pXZk0Wd)
(https://i.ibb.co/yRSJ6W5/25-Bolt-group-extractor-WI.jpg) (https://ibb.co/H2dQtnY)
(https://i.ibb.co/qmSBBwY/27-Op-slide-9-7.jpg) (https://ibb.co/DwJ44nf)
(https://i.ibb.co/KKFLBWd/26-Op-slide-S.jpg) (https://ibb.co/CPhM4Qg)
(https://i.ibb.co/JcyMy6R/28-recoil-plate-SW.jpg) (https://ibb.co/TwbFbjB)
(https://i.ibb.co/Wzhcp30/29-Trigger-group-BE-B.jpg) (https://ibb.co/n1GD80B)
(https://i.ibb.co/HVgMk0r/31-Trigger-group-sear-SW-S-G.jpg) (https://ibb.co/FK7fj9B)
(https://i.ibb.co/qmG1CHC/30-Trigger-group-hammer-H-I.jpg) (https://ibb.co/JrLkqYq)
(https://i.ibb.co/MNFNjQh/32-Trigger-group-left-full.jpg) (https://ibb.co/YjHjKwW)
-
Nice looking cartouche on that stock , even looks to be a nice IBM trigger housing with a rare S’G’ sear !
I always had a hard time with those bolt tools but you seem to have the magic touch - my old eyes and shaky hands have their limits but I still have fun trying
Nice addition clap1
-
Nice looking cartouche on that stock , even looks to be a nice IBM trigger housing with a rare S’G’ sear !
I always had a hard time with those bolt tools but you seem to have the magic touch - my old eyes and shaky hands have their limits but I still have fun trying
Nice addition clap1
Thanks!
Yeah, even with the bolt tool it still takes a bit of fiddling and steady hands. I disassembled and reassembled my first one without a tool banghead1 and bought a repro tool right afterwards rofl Many years later I stumbled upon an unopened box of GI tools when scouting out European sources, so I’m set.
-
Very nice SP, Jon. Nice photos.
-
Very nice SP, Jon. Nice photos.
Thanks Bob :)