Author Topic: Old Guy's DIY Hobby SKS Bullpup  (Read 2919 times)

0 Members and 2 Guests are viewing this topic.

Offline Beast-of-Burden

  • Trade Count: (0)
  • Newber
  • *
  • Posts: 12
Old Guy's DIY Hobby SKS Bullpup
« on: May 13, 2021, 11:19:35 PM »
Back in 1993 with talk of stopping Chinese imports (especially guns) and with early talks of Y2K issues with possible Armageddon actions etc.  I wanted a semiauto rifle that used the caliber ammo that the supposed enemy would have & could be taken. Not being a full blown prepper but wanted it 'just incase'. Found a Norinco Sporter that had the shorter barrel and used AK47 magazines. It sat in my gun safe with my other guns but rarely shot it except to keep the optics sighted in.
Being a mechanical DIY type I thought it would be fun to convert it to a compact Bullpup. Not wanting to spend the money to buy an existing conversion setup I tinkered around until I made one I liked (it's not to everyone's taste). Added a few unnecessary things like a green laser and mounted flashlight but it was fun to tinker with.
 


Offline Justin Hell

  • Bubba/Purist Flip Flopper
  • BATTLEFIELD COMMISSION
  • Trade Count: (+7)
  • Sniper
  • *
  • Posts: 2588
  • First Restore... Then Bubba.
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #1 on: May 13, 2021, 11:36:52 PM »
I gotta say, that is pretty darn slick lookin!
 thumb1

Offline Beast-of-Burden

  • Trade Count: (0)
  • Newber
  • *
  • Posts: 12
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #2 on: May 13, 2021, 11:50:57 PM »
Thanks...  :)

Offline Phosphorus32

  • Administrator
  • Trade Count: (+13)
  • Sniper
  • *
  • Posts: 6796
  • Send lawyers guns and money...uh, skip the lawyers
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #3 on: May 14, 2021, 12:23:17 PM »
Even as a purist, I have to admit that's cool looking. Certainly shows a lot of craftsmanship. Did you actually make it out of carbon fiber? Mag changes look like they're a bit trickier than on the original.

Offline Beast-of-Burden

  • Trade Count: (0)
  • Newber
  • *
  • Posts: 12
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #4 on: May 14, 2021, 01:40:29 PM »
Not real carbon fiber, the stock was made with 14+ layers of 1/4" (3 ply) plywood glued & clamped till dry. The different layers were pre-cut to follow the shape of the receiver/barrel etc. That way it saved carving out that much from a solid wood blank. After finishing the final shape it was given it's look with the Hydrodip paint film process & sealed with polyurethane. The bottom of the pistol grip has a notched area that clears the magazine when installed or removed. It works smoothly, just push the release & rotate the mag forward like normal (to remove).

Offline carls sks

  • Location: Culpeper, Virginia
  • Trade Count: (0)
  • Sharp-Shooter
  • *
  • Posts: 1420
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #5 on: May 14, 2021, 03:11:18 PM »
not for everyone or me. BUT: you have talent, nice craftsmanship.
ARMY NAM VET, SO PROUD!

Offline Beast-of-Burden

  • Trade Count: (0)
  • Newber
  • *
  • Posts: 12
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #6 on: May 14, 2021, 04:46:07 PM »
Vietnam Era Vet (Navy) here... I understand converting a firearm isn't everyone's thing so thanks for the kind thoughts.

Thanks for your service over there.

Offline carls sks

  • Location: Culpeper, Virginia
  • Trade Count: (0)
  • Sharp-Shooter
  • *
  • Posts: 1420
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #7 on: May 14, 2021, 07:13:08 PM »
 supported a market-time(was a navy unit I believe. my memory kind of stinks)at times over there. thanks for your service too BoB.
ARMY NAM VET, SO PROUD!

Offline lowell66dart

  • Trade Count: (+7)
  • Marksman
  • *
  • Posts: 274
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #8 on: May 15, 2021, 09:49:28 PM »
I really wish you were my neighbor...
I have to grow old but I don't have to grow up...

Offline Beast-of-Burden

  • Trade Count: (0)
  • Newber
  • *
  • Posts: 12
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #9 on: May 15, 2021, 11:21:59 PM »
 :) Thanks

Offline Power Surge

  • BATTLEFIELD COMMISSION
  • Trade Count: (+4)
  • Sharp-Shooter
  • *
  • Posts: 1405
  • Commercial dude
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #10 on: May 16, 2021, 09:54:28 AM »
From one bullpup SKS guy to another... very nice job :)

Offline Beast-of-Burden

  • Trade Count: (0)
  • Newber
  • *
  • Posts: 12
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #11 on: May 16, 2021, 10:55:34 AM »
Appreciate that, Have fun.   :)

Offline Bob_The_Student

  • SKS-FILES CONTRIBUTOR
  • Trade Count: (+2)
  • Sharp-Shooter
  • *
  • Posts: 1273
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #12 on: May 16, 2021, 06:26:26 PM »
I like that setup, you did a nice job. I really like the look of the "faux" carbon fiber stock.

Offline Beast-of-Burden

  • Trade Count: (0)
  • Newber
  • *
  • Posts: 12
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #13 on: May 16, 2021, 09:19:46 PM »
Thanks, It was the first time I used a "HYDROGRAPHIC WATER TRANSFER CARBON FIBER FILM KIT". Watched a few videos online the decided I'd buy one off eBay & try it. I lucked out & didn't screw it up.  dance2

Offline Larry D.

  • Bitter, Clinging Deplorable
  • Trade Count: (+12)
  • Sharp-Shooter
  • *
  • Posts: 1715
  • Do the next right thing.
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #14 on: May 21, 2021, 01:24:19 AM »
Wow.
That's an eye catcher for certain. You do nice work.
Η ΤΑΝ Η ΕΠΙ ΤΑΣ
-------------------

Thou shalt not test me.
Mood 24:7

Offline Beast-of-Burden

  • Trade Count: (0)
  • Newber
  • *
  • Posts: 12
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #15 on: May 21, 2021, 01:23:16 PM »
Thank you.
Too much free time when ammo availability (& cost) restricts shooting time. I end up looking for hobby projects.
 ::)

Offline Greatguns

  • SKS-FILES CONTRIBUTOR
  • Trade Count: (+22)
  • Sniper
  • *
  • Posts: 3269
  • Inventor of the Intrafuse folding adapter.
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #16 on: May 21, 2021, 01:32:38 PM »
You got any more pics of that thing so we can see it from different angles and get some of the details on it? Definitely has the cool factor going on.
My Avatar is a pic of the real "Ghost" SKS in honor of xxxsks(joe). It is a pic of a fully decked out SKS in Capco hunter's kit. This was mine, the only other pic I had ever seen of one was Joe's.

Offline Beast-of-Burden

  • Trade Count: (0)
  • Newber
  • *
  • Posts: 12
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #17 on: May 21, 2021, 02:35:21 PM »



Offline Greatguns

  • SKS-FILES CONTRIBUTOR
  • Trade Count: (+22)
  • Sniper
  • *
  • Posts: 3269
  • Inventor of the Intrafuse folding adapter.
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #18 on: May 21, 2021, 03:46:37 PM »
To quote Spock "I find it...fascinating"

Do you have the Magwedge rail hard mounted to the aftermarket receiver cover or just laying over it? I'd also be curious to see your trigger linkage setup.
My Avatar is a pic of the real "Ghost" SKS in honor of xxxsks(joe). It is a pic of a fully decked out SKS in Capco hunter's kit. This was mine, the only other pic I had ever seen of one was Joe's.

Offline Beast-of-Burden

  • Trade Count: (0)
  • Newber
  • *
  • Posts: 12
Re: Old Guy's DIY Hobby SKS Bullpup
« Reply #19 on: May 21, 2021, 04:31:32 PM »
When the ring-pin is removed it hinges up away from the aftermarket receiver cover, it's not attached to it. The cheek rest is attached to the Magwedge rail. For the time being I don't want to disassemble the gun in order to take a pic of the trigger but I got a spare stock trigger and cut it down just enough to leave a linkage tab for the extension linkage rod. With it in the normal location I made a secured mount to hold the stock trigger (& safety) set up front for the extension linkage rod. I added an additional return tension spring to offset the 'drag' of the linkage rod addition. It's no hair trigger but it's not too bad considering it's a bullpup & the stock SKS wasn't exactly a light pull. For an urban defense use weapon it's fine.