Working on a Yugo and wanted to ask for some advice.... 🤔
Previous owner told me he never fired it, but it is a nice looking rifle. Has a rubber butt plate, cleaning kit but no spring.

The bolt didn't pass my "shake test" so I decided to take out the firing pin. It was quite difficult to get out - lots of carbon and there seemed to be a burr/rough spot on top. Couldn't pull it out by hand... Got it cleaned up and tried to reinstall the pin, but it didn't go in easy. Have to twist it some.
I ever so gently tried to file the burr off (just a few light passes). Went back in easier this time however it still isn't real smooth. It will shake now, but will hang up in the rearward position, so the firing pin isn't showing on the front. A gentile push with my finger and it returns to the normal position.
Burr area highlighted.
What do you think? Should I replace the pin if (if can find one) or try to ensure it's smooth with the least amount of filing?
Thank you!


