Author Topic: stripper clips  (Read 3094 times)

0 Members and 1 Guest are viewing this topic.

Offline milboltnut

  • Trade Count: (0)
  • Newber
  • *
  • Posts: 17
stripper clips
« on: March 31, 2020, 01:27:12 PM »
Hi guys,
              I picked up some aftermarket reproductions at a gunshow awhile back..... and had the typical issues of loading. After watching a few vids and reading about how some guys try and rectify the problem, I tried a way that really helps alot, matter of fact, it will get as good as it will get.

I loaded up some dummy loads, and worked the loaded clip in my bench vice...

Standing the clip with cartridges up, I worked one end of clip to the other gently closing the vice jaws on the clip lips.

Next layed the clip with cartridges flat, I worked the clip in the vice jaws gently pressing the lip of the clip from one end to the other.

Basically what I accomplished is the channel where the cases slide into.. having a slightly looser fit, causing the cases to bind....   The channel now is tighter and now the cases do not bind and slide down easier in the clip.

It works very well...

Ralph
« Last Edit: April 02, 2020, 04:25:26 PM by milboltnut »

Offline Larry D.

  • Bitter, Clinging Deplorable
  • Trade Count: (+12)
  • Sharp-Shooter
  • *
  • Posts: 1715
  • Do the next right thing.
Re: stripper clips
« Reply #1 on: March 31, 2020, 02:04:58 PM »
Interesting.
I think I have some of those around here somewhere.
Looks like I have a month to kill anyways..........
Η ΤΑΝ Η ΕΠΙ ΤΑΣ
-------------------

Thou shalt not test me.
Mood 24:7

Offline carls sks

  • Location: Culpeper, Virginia
  • Trade Count: (0)
  • Sharp-Shooter
  • *
  • Posts: 1420
Re: stripper clips
« Reply #2 on: March 31, 2020, 05:02:24 PM »
thank for info Ralph (don't have any and won't be buying any in future. have all i need of the bxn65 type i got off eBay many years ago).  thumb1
ARMY NAM VET, SO PROUD!

Offline Bacarnal

  • SKS-FILES CONTRIBUTOR
  • Trade Count: (+7)
  • Sharp-Shooter
  • *
  • Posts: 1086
  • SQUIRREL!!! Camp Lejuene Water Survivor.
Re: stripper clips
« Reply #3 on: April 01, 2020, 01:05:30 PM »
Thanks, Ralph.  Those clips tend to be rough, also, so running a fired steel casing through them several Tim's gets them a bit smoother.  Thanks again, Bruce.

Offline Larry D.

  • Bitter, Clinging Deplorable
  • Trade Count: (+12)
  • Sharp-Shooter
  • *
  • Posts: 1715
  • Do the next right thing.
Re: stripper clips
« Reply #4 on: April 01, 2020, 05:28:08 PM »
thank for info Ralph (don't have any and won't be buying any in future. have all i need of the bxn65 type i got off eBay many years ago).  thumb1

Grrrrr!

Been trying to score some of those for a while now.
I have a mix of good clips for shooting, but I'm specifically trying to fill two ammo pouches.
Η ΤΑΝ Η ΕΠΙ ΤΑΣ
-------------------

Thou shalt not test me.
Mood 24:7

Offline milboltnut

  • Trade Count: (0)
  • Newber
  • *
  • Posts: 17
Re: stripper clips
« Reply #5 on: April 01, 2020, 05:32:42 PM »
which ones work best? I have two Russian ones coming in the mail.....

Offline Larry D.

  • Bitter, Clinging Deplorable
  • Trade Count: (+12)
  • Sharp-Shooter
  • *
  • Posts: 1715
  • Do the next right thing.
Re: stripper clips
« Reply #6 on: April 02, 2020, 02:28:54 PM »
Pretty much all of them work well except the new Chinese ones.

Even then, those seem to work well in some rifles.
Η ΤΑΝ Η ΕΠΙ ΤΑΣ
-------------------

Thou shalt not test me.
Mood 24:7

Offline milboltnut

  • Trade Count: (0)
  • Newber
  • *
  • Posts: 17
Re: stripper clips
« Reply #7 on: April 02, 2020, 03:58:30 PM »
the new ones.... are they stamped 31?

A buddy just gave me chinese marked 31.. and they work great.

Offline Larry D.

  • Bitter, Clinging Deplorable
  • Trade Count: (+12)
  • Sharp-Shooter
  • *
  • Posts: 1715
  • Do the next right thing.
Re: stripper clips
« Reply #8 on: April 02, 2020, 06:09:02 PM »
I'd have to scratch some out, but I don't think the new ones are marked.
Η ΤΑΝ Η ΕΠΙ ΤΑΣ
-------------------

Thou shalt not test me.
Mood 24:7

Offline milboltnut

  • Trade Count: (0)
  • Newber
  • *
  • Posts: 17
Re: stripper clips
« Reply #9 on: April 02, 2020, 06:47:58 PM »
unmarked, repops?

Offline echo83

  • Trade Count: (0)
  • Rifleman
  • *
  • Posts: 133
Re: stripper clips
« Reply #10 on: April 04, 2020, 09:41:33 AM »
I just picked up 20 stripper clips plus a chest rig for $25.90 shipping included from Sarco. Best deal I've found to date.

The clips are all new-looking, but they were carefully cleaned of cosmoline before they were shipped. They are grey metal marked with a 211 on the spine. I was hoping not to end up with NC Star clips, so I was pleasantly surprised.

Steel cased ammo slides right through with no snags, but the copper washed surplus is a little sticky. I tried sliding a steel cased round that I had dipped in CLP through them...it helped a little bit.

The rig itself looks new and unissued, very stiff, with a few white spots from storage. I'd definitely recommend it!

Burt Gummer wannabes of the world unite!

Offline Larry D.

  • Bitter, Clinging Deplorable
  • Trade Count: (+12)
  • Sharp-Shooter
  • *
  • Posts: 1715
  • Do the next right thing.
Re: stripper clips
« Reply #11 on: April 04, 2020, 06:09:44 PM »

Burt Gummer wannabes of the world unite!

I'm in!
Got two of them stuffed with copper washed goodness.

Take a close look the those white spots to be sure they're not mold.
Η ΤΑΝ Η ΕΠΙ ΤΑΣ
-------------------

Thou shalt not test me.
Mood 24:7

Offline echo83

  • Trade Count: (0)
  • Rifleman
  • *
  • Posts: 133
Re: stripper clips
« Reply #12 on: April 04, 2020, 07:04:41 PM »

Burt Gummer wannabes of the world unite!

I'm in!
Got two of them stuffed with copper washed goodness.

Take a close look the those white spots to be sure they're not mold.

I decided not to take the chance on it being mold. Gave the rig a good soak in hot water and dish detergent, then a scrub with a brush. Sun dried it today, then loaded it, folded it and stowed it in an ammo can.

Nylon lining in the pouches (not just the cleaning kit pouch) makes me think it's recent production.

Offline Larry D.

  • Bitter, Clinging Deplorable
  • Trade Count: (+12)
  • Sharp-Shooter
  • *
  • Posts: 1715
  • Do the next right thing.
Re: stripper clips
« Reply #13 on: April 05, 2020, 03:39:13 AM »
Nylon toggles, or wood?
Η ΤΑΝ Η ΕΠΙ ΤΑΣ
-------------------

Thou shalt not test me.
Mood 24:7

Offline echo83

  • Trade Count: (0)
  • Rifleman
  • *
  • Posts: 133
Re: stripper clips
« Reply #14 on: April 05, 2020, 10:10:31 AM »
Wood toggles. Canvas fabric, nylon backing in the pouches and on the reverse of the belt. Chinese characters on the back of the belt. Google instant translate was all over the place when I pointed my phone at it, but I was able to get "7.62 millimeter, "Semi automatic," and "Type/ Year 79."

Offline milboltnut

  • Trade Count: (0)
  • Newber
  • *
  • Posts: 17
Re: stripper clips
« Reply #15 on: April 07, 2020, 06:28:00 AM »
please keep on topic

Offline echo83

  • Trade Count: (0)
  • Rifleman
  • *
  • Posts: 133
Re: stripper clips
« Reply #16 on: April 07, 2020, 04:32:05 PM »
please keep on topic

No problem.

Um, some of mine have 31 on them, too. They work great. Better?

My apologies, I thought you were looking for a source of affordable, reliable, military surplus stripper clips. Since I found one, I thought I'd share it with everyone.

Sorry to derail the thread by answering your question, giving you a source, then encouraging a discussion. On a discussion board, no less. Please forgive me.

Offline Larry D.

  • Bitter, Clinging Deplorable
  • Trade Count: (+12)
  • Sharp-Shooter
  • *
  • Posts: 1715
  • Do the next right thing.
Re: stripper clips
« Reply #17 on: April 08, 2020, 11:22:22 PM »
Η ΤΑΝ Η ΕΠΙ ΤΑΣ
-------------------

Thou shalt not test me.
Mood 24:7

Online Bubbazinetti

  • MAGA Patriot
  • SKS-FILES CONTRIBUTOR
  • Trade Count: (0)
  • Marksman
  • *
  • Posts: 582
Re: stripper clips
« Reply #18 on: April 08, 2020, 11:26:05 PM »
This thread is worthless without pics.Few know what you are describing in detail.
When guns are outlawed only outlaws will have guns.

Offline Greatguns

  • SKS-FILES CONTRIBUTOR
  • Trade Count: (+22)
  • Sniper
  • *
  • Posts: 3268
  • Inventor of the Intrafuse folding adapter.
Re: stripper clips
« Reply #19 on: July 30, 2020, 01:42:00 PM »
I have had many "aftermarket" stripper clips over the years. My fix has always been to take either lapping compound(preferred) and CLP. I take a spent round and coat the rim with the compound then run it back and forth on the clip to de-burr/smooth out/break-in the channels of the clip. Then clean it off with brake cleaner spray and finally spray it with CLP or gun oil. Have never had much issue with them after that.

My Avatar is a pic of the real "Ghost" SKS in honor of xxxsks(joe). It is a pic of a fully decked out SKS in Capco hunter's kit. This was mine, the only other pic I had ever seen of one was Joe's.