« previous next »
Pages: [1]   Go Down

Author Topic: Chu Wood Source.  (Read 7073 times)

0 Members and 1 Guest are viewing this topic.

Offline John Galt

  • Jack of all trades…Master of none!
  • SKS-FILES CONTRIBUTOR
  • Trade Count: (+5)
  • Marksman
  • *
  • Posts: 368
Chu Wood Source.
« on: May 25, 2016, 09:08:10 PM »
I recently got a paratrooper, /26\ 3 million serial with a spike bayonet.  Bubba cut the stock to fit the bayonet.... :-[...bad Bubba.  I am a weekend woodworker and thought I could fill in the stock and re-cut the blade groove if I only had some Chu wood.  At the store where everything is $1, I bought some paint brushes with Chu handles.  Amber shellac on the brush handle and it was a perfect match...but too small for the groove.  Then I was in a big box home improvement store this past weekend and something caught my eye.  They had samples of pre-finished hardwood flooring labeled as maple that was clearly Chu.  I got a 4" x 14" sample for $4 and took it home.  Perfect match...so far.  I milled out the slot in the stock, cut a piece of flooring to fit and it is in glue and clamps now.  I will post pics when it is finished!

Logged
When the Cambrian measures were forming, They promised perpetual peace.
They swore, if we gave them our weapons, that the wars of the tribes would cease.
But when we disarmed They sold us and delivered us bound to our foe,
And the Gods of the Copybook Headings said: "Stick to the Devil you know."
Rudyard Kipling  1919

Offline Dannyboy53

  • Trade Count: (+3)
  • Sniper
  • *
  • Posts: 2208
Re: Chu Wood Source.
« Reply #1 on: May 25, 2016, 09:36:23 PM »
Sounds interesting, looking forward to the photos. "Where there is a will there is a way"!
Logged

Offline Loose}{Cannon

  • Administrator
  • Trade Count: (+16)
  • Sniper
  • *
  • Posts: I am a geek!!
  • Constitutional Extremist
Re: Chu Wood Source.
« Reply #2 on: May 25, 2016, 10:12:43 PM »
Nice... How you cutting the blade groove?
Logged
      
1776 will commence again if you try to take our firearms... It doesn't matter how many Lenins you get out on the street begging for them to be taken.

Offline John Galt

  • Jack of all trades…Master of none!
  • SKS-FILES CONTRIBUTOR
  • Trade Count: (+5)
  • Marksman
  • *
  • Posts: 368
Re: Chu Wood Source.
« Reply #3 on: May 26, 2016, 06:00:14 AM »
I have a harbor freight cross slide vise mounted on my drill press.  I chuck a router bit in the drill press and clamp the stock in the vise.  A few cranks of the handle and its done!  I milled out the Bubba slot in this manner and it worked very well. 

I thought about using my table saw with some stops set up to reproduce the slot and I may once I inspect the slot on my other blade bayonet stocks.  I guess I could also use my radial arm saw....Good question L-C
Logged
When the Cambrian measures were forming, They promised perpetual peace.
They swore, if we gave them our weapons, that the wars of the tribes would cease.
But when we disarmed They sold us and delivered us bound to our foe,
And the Gods of the Copybook Headings said: "Stick to the Devil you know."
Rudyard Kipling  1919

Online Phosphorus32

  • Administrator
  • Trade Count: (+13)
  • Sniper
  • *
  • Posts: 6801
  • Send lawyers guns and money...uh, skip the lawyers
Re: Chu Wood Source.
« Reply #4 on: May 26, 2016, 08:17:06 AM »
Good eye on spotting the wood  thumb1

Looking forward to seeing the results.
Logged

Offline Loose}{Cannon

  • Administrator
  • Trade Count: (+16)
  • Sniper
  • *
  • Posts: I am a geek!!
  • Constitutional Extremist
Re: Chu Wood Source.
« Reply #5 on: May 26, 2016, 09:42:31 AM »
Yeah... The slot has a radius towart the rear.  Why I was thinking a rounded blade cutter.  May wanna experiment on some scrap. 
Logged
      
1776 will commence again if you try to take our firearms... It doesn't matter how many Lenins you get out on the street begging for them to be taken.

Offline John Galt

  • Jack of all trades…Master of none!
  • SKS-FILES CONTRIBUTOR
  • Trade Count: (+5)
  • Marksman
  • *
  • Posts: 368
Re: Chu Wood Source.
« Reply #6 on: May 28, 2016, 07:31:00 PM »
Here are the pics of the complete un-Bubba.  It turned out fairly well.  She shellac is still a little too new but some steel wool will take care of it. 

First pic is the donor wood glued in place and sanded to match the stock contours:

2nd pic is the cut and shellac job:

3rd is completed:
Logged
When the Cambrian measures were forming, They promised perpetual peace.
They swore, if we gave them our weapons, that the wars of the tribes would cease.
But when we disarmed They sold us and delivered us bound to our foe,
And the Gods of the Copybook Headings said: "Stick to the Devil you know."
Rudyard Kipling  1919

Offline carls sks

  • Location: Culpeper, Virginia
  • Trade Count: (0)
  • Sharp-Shooter
  • *
  • Posts: 1420
Re: Chu Wood Source.
« Reply #7 on: May 28, 2016, 07:42:02 PM »
nice work, can't even tell what you did.  thumb1
Logged
ARMY NAM VET, SO PROUD!

Offline Dannyboy53

  • Trade Count: (+3)
  • Sniper
  • *
  • Posts: 2208
Re: Chu Wood Source.
« Reply #8 on: May 28, 2016, 07:58:08 PM »
John did you used to make stocks for the Chinese? Very good job, looks great!  clap1
Logged

Offline Loose}{Cannon

  • Administrator
  • Trade Count: (+16)
  • Sniper
  • *
  • Posts: I am a geek!!
  • Constitutional Extremist
Re: Chu Wood Source.
« Reply #9 on: May 28, 2016, 08:44:59 PM »
Perfect.    What you make the cut with?
Logged
      
1776 will commence again if you try to take our firearms... It doesn't matter how many Lenins you get out on the street begging for them to be taken.

Offline John Galt

  • Jack of all trades…Master of none!
  • SKS-FILES CONTRIBUTOR
  • Trade Count: (+5)
  • Marksman
  • *
  • Posts: 368
Re: Chu Wood Source.
« Reply #10 on: May 28, 2016, 08:48:03 PM »
Thanks guys!  I made the slot with my 8 1/4" radial arm saw.  Easy peasy lemon squeezy!
Logged
When the Cambrian measures were forming, They promised perpetual peace.
They swore, if we gave them our weapons, that the wars of the tribes would cease.
But when we disarmed They sold us and delivered us bound to our foe,
And the Gods of the Copybook Headings said: "Stick to the Devil you know."
Rudyard Kipling  1919

Offline Loose}{Cannon

  • Administrator
  • Trade Count: (+16)
  • Sniper
  • *
  • Posts: I am a geek!!
  • Constitutional Extremist
Re: Chu Wood Source.
« Reply #11 on: May 28, 2016, 08:50:06 PM »
Thought so... Iooks good.
Logged
      
1776 will commence again if you try to take our firearms... It doesn't matter how many Lenins you get out on the street begging for them to be taken.

Online Phosphorus32

  • Administrator
  • Trade Count: (+13)
  • Sniper
  • *
  • Posts: 6801
  • Send lawyers guns and money...uh, skip the lawyers
Re: Chu Wood Source.
« Reply #12 on: May 28, 2016, 09:32:58 PM »
Stellar work  :o   thumb1
Logged
Pages: [1]   Go Up
« previous next »