Author Topic: Long Barrel Yugo M59's at Dan's  (Read 19882 times)

0 Members and 1 Guest are viewing this topic.

Offline Direct Connection

  • SKS-FILES CONTRIBUTOR
  • Trade Count: (+3)
  • Marksman
  • *
  • Posts: 991
  • California is where reality goes to die.
Re: Long Barrel Yugo M59's at Dan's
« Reply #40 on: August 01, 2016, 12:15:59 AM »
Nobody?

Ok here is a couple pics of a regular M59. I hope this helps. Oh And mybayo is beautiful, That flash did me no justice  cry1.. I have to admit that I dont think these LB M59s get much better if any then OL # 40.. 




Offline Loose}{Cannon

  • Administrator
  • Trade Count: (+16)
  • Sniper
  • *
  • Posts: I am a geek!!
  • Constitutional Extremist
Re: Long Barrel Yugo M59's at Dan's
« Reply #41 on: August 01, 2016, 11:11:37 AM »
I was asking about the standard barrel length, not bayo... :)
      
1776 will commence again if you try to take our firearms... It doesn't matter how many Lenins you get out on the street begging for them to be taken.

Offline Phosphorus32

  • Administrator
  • Trade Count: (+13)
  • Sniper
  • *
  • Posts: 6823
  • Send lawyers guns and money...uh, skip the lawyers
Re: Long Barrel Yugo M59's at Dan's
« Reply #42 on: August 01, 2016, 12:43:09 PM »
Was out of town over the weekend. Will try to measure tonight  :)

Offline Greasemonkey

  • Professional foul mouth. Banned for life!! Certified Enabler
  • Administrator
  • Trade Count: (+14)
  • Sniper
  • *
  • Posts: I am a geek!!
  • The only way to avoid SKS #2, is avoid SKS #1!
Re: Long Barrel Yugo M59's at Dan's
« Reply #43 on: August 01, 2016, 03:52:04 PM »
Whats the exact length of the regular m59 barrel?

I got 2 different readings :o  The "C" is exactly 20 1/2 inches long, the funky part, measuring the "B" exactly the same way I got 20 and 3/8 inches. I remeasured both twice, got the same measurement each time. think1
I'm going to make him an offer he can't refuse......

Leave the gun, take the cannoli.

I said I was an addict........I didn't say I had a problem

Offline running-man

  • Administrator
  • Trade Count: (+5)
  • Sniper
  • *
  • Posts: 6880
  • The only way to avoid Mosin #2 is avoid Mosin #1!
Re: Long Barrel Yugo M59's at Dan's
« Reply #44 on: August 01, 2016, 05:20:03 PM »
I got 2 different readings :o  The "C" is exactly 20 1/2 inches long, the funky part, measuring the "B" exactly the same way I got 20 and 3/8 inches. I remeasured both twice, got the same measurement each time. think1

Now that is interesting, very interesting... think1
      

Offline Loose}{Cannon

  • Administrator
  • Trade Count: (+16)
  • Sniper
  • *
  • Posts: I am a geek!!
  • Constitutional Extremist
Re: Long Barrel Yugo M59's at Dan's
« Reply #45 on: August 01, 2016, 05:32:11 PM »
Soo...   1.5" longer.   Why we have them listed at 1.75" in ghe serial board?
      
1776 will commence again if you try to take our firearms... It doesn't matter how many Lenins you get out on the street begging for them to be taken.

Offline Greasemonkey

  • Professional foul mouth. Banned for life!! Certified Enabler
  • Administrator
  • Trade Count: (+14)
  • Sniper
  • *
  • Posts: I am a geek!!
  • The only way to avoid SKS #2, is avoid SKS #1!
Re: Long Barrel Yugo M59's at Dan's
« Reply #46 on: August 01, 2016, 05:40:36 PM »
I got 2 different readings :o  The "C" is exactly 20 1/2 inches long, the funky part, measuring the "B" exactly the same way I got 20 and 3/8 inches. I remeasured both twice, got the same measurement each time. think1

Now that is interesting, very interesting... think1
So.... :o maybe it's a....OMG  yahoo1 :o ......Para YugoTrooper  rofl2  chuckles1

A different measuring stick yielded the same 2 measurements. I'm sure it doesn't mean much, both crowns look the same as well, so it wasn't exactly a recent thing I would guess.
I'm going to make him an offer he can't refuse......

Leave the gun, take the cannoli.

I said I was an addict........I didn't say I had a problem

Offline Phosphorus32

  • Administrator
  • Trade Count: (+13)
  • Sniper
  • *
  • Posts: 6823
  • Send lawyers guns and money...uh, skip the lawyers
Re: Long Barrel Yugo M59's at Dan's
« Reply #47 on: August 01, 2016, 06:02:12 PM »
Soo...   1.5" longer.   Why we have them listed at 1.75" in ghe serial board?

22.25 - 20.5 = 1.75

Offline Loose}{Cannon

  • Administrator
  • Trade Count: (+16)
  • Sniper
  • *
  • Posts: I am a geek!!
  • Constitutional Extremist
Re: Long Barrel Yugo M59's at Dan's
« Reply #48 on: August 01, 2016, 06:50:48 PM »
Quote
The barrel measures 22" from bolt face to muzzle.

You said the LB was 22" not 22.25".

Which is it?!
      
1776 will commence again if you try to take our firearms... It doesn't matter how many Lenins you get out on the street begging for them to be taken.

Offline Phosphorus32

  • Administrator
  • Trade Count: (+13)
  • Sniper
  • *
  • Posts: 6823
  • Send lawyers guns and money...uh, skip the lawyers
Re: Long Barrel Yugo M59's at Dan's
« Reply #49 on: August 01, 2016, 08:30:11 PM »
It was the careful measurement of 22.25" I posted on page 2. Just trying to keep you on your toes  rofl

Offline Loose}{Cannon

  • Administrator
  • Trade Count: (+16)
  • Sniper
  • *
  • Posts: I am a geek!!
  • Constitutional Extremist
Re: Long Barrel Yugo M59's at Dan's
« Reply #50 on: August 01, 2016, 09:22:15 PM »
 bat1

Thats the entire reason I was beating the length horse!  Lets not round sheet off and make me triple-take the same ocd issue again.....    mmmmmm kay?    :)
      
1776 will commence again if you try to take our firearms... It doesn't matter how many Lenins you get out on the street begging for them to be taken.

Offline Direct Connection

  • SKS-FILES CONTRIBUTOR
  • Trade Count: (+3)
  • Marksman
  • *
  • Posts: 991
  • California is where reality goes to die.
Re: Long Barrel Yugo M59's at Dan's
« Reply #51 on: August 01, 2016, 09:28:22 PM »
I was asking about the standard barrel length, not bayo... :)

Geez I dont even    drink. What was I thinking. Since I worked so hard to try and help can I leave my pics up for a couple days ? I also just measured my C series BBL was 20 1/2..

Offline Loose}{Cannon

  • Administrator
  • Trade Count: (+16)
  • Sniper
  • *
  • Posts: I am a geek!!
  • Constitutional Extremist
Re: Long Barrel Yugo M59's at Dan's
« Reply #52 on: August 01, 2016, 10:25:18 PM »
I was asking about the standard barrel length, not bayo... :)

Geez I dont even    drink. What was I thinking. Since I worked so hard to try and help can I leave my pics up for a couple days ? I also just measured my C series BBL was 20 1/2..

Laff....  I do it everyday!!       No worries man.    rofl
      
1776 will commence again if you try to take our firearms... It doesn't matter how many Lenins you get out on the street begging for them to be taken.

Offline Phosphorus32

  • Administrator
  • Trade Count: (+13)
  • Sniper
  • *
  • Posts: 6823
  • Send lawyers guns and money...uh, skip the lawyers
Re: Long Barrel Yugo M59's at Dan's
« Reply #53 on: August 01, 2016, 10:38:20 PM »
bat1

Thats the entire reason I was beating the length horse!  Lets not round sheet off and make me triple-take the same ocd issue again.....    mmmmmm kay?    :)

Okay, I used a tape measure for the first one...didn't trust it to 3 significant figures, hence my follow on post 3 days ago   thumb1  :)

Offline Loose}{Cannon

  • Administrator
  • Trade Count: (+16)
  • Sniper
  • *
  • Posts: I am a geek!!
  • Constitutional Extremist
Re: Long Barrel Yugo M59's at Dan's
« Reply #54 on: August 01, 2016, 11:12:57 PM »
Ah...  ok ok ok.  I missed it!   

Dont let it happen again.     fineprint
      
1776 will commence again if you try to take our firearms... It doesn't matter how many Lenins you get out on the street begging for them to be taken.

Offline Phosphorus32

  • Administrator
  • Trade Count: (+13)
  • Sniper
  • *
  • Posts: 6823
  • Send lawyers guns and money...uh, skip the lawyers
Re: Long Barrel Yugo M59's at Dan's
« Reply #55 on: August 01, 2016, 11:40:19 PM »
Ah...  ok ok ok.  I missed it!   

Dont let it happen again.     fineprint

 :-[  rofl