SKS-FILES FORUM
General Milsurp Weapons => Milsurp Rifles & Carbines => Mosins & Soviet Arms => Topic started by: Bacarnal on August 01, 2021, 02:56:51 PM
-
Got this one over a month back and finally able to pick it up two weeks ago. Looks to be an all matching 1941 Izhevsk with an early 8 hole gas piston cover. I've tried finding out the significance and the time frame of the transition on the interweb but I'm coming up dry.
The bore is pristine and the stock has some arsenal patches. The handguard is cracked, so I've got a couple of replacement handguards coming in from Mother Russia. Hope they get here safely.
For those of you that like pictures as much as I do, I've tried to upload them but keep on getting the "You have been forbidden to use this website" error message. I'll try some pix later.
-
Love the svt 40's ...looking forward to the post.
-
Serial is rp705 (cyrillic for GR705, can't get the phone to type it, though). And STILL getting that error message. Sorry!!
-
Have you restarted/ reloaded your browser or computer. Do you use a VPN? Perhaps something is off for some reason. This is the easiest site to upload photos so I think it should be something on your end. I base this on zero information of course. chuckles1 chuckles1
-
BTS, I'm using my phone. I've used it on every post I've done, so I can't understand why can't post a picture. I guess I'll have to shut down my phone and see what happens. Thanks.
Well, I turned my phone off. Seems to have helped. More pix tomorrow. Cheers!!!
(https://i.ibb.co/Nj8CkXM/20210801-145849.jpg) (https://ibb.co/9TFgfJ7)
(https://i.ibb.co/KrsrsTR/20210801-145822.jpg) (https://ibb.co/tJ2J2Vk)
-
Nice March 1941 Izhevsk SVT-40, congrats!!
-
The stock is an SVT-40 stock. It is extremely common to see arsenal repairs on SVT-40 stocks.
-
Nice! Matching SVT-40s are hard to find! thumb1
Looking forward to more pictures :)
-
Good looking rifle... congrats. Looking forward to more details.
-
Got some more pictures. The patch on the R/H side is well done with a groove cut into the patch and slipped over the matching wedge cut in the stock. The only non matching part(s) are the Tula butt plate and magazine.
When did they transition from the 8 hole piston cover to the 7 hole?
Thanks, Bruce!!
(https://i.ibb.co/5RmdMy3/20210803-173551.jpg) (https://ibb.co/VqRdjZG)
(https://i.ibb.co/BZnqsMv/20210803-173601.jpg) (https://ibb.co/2tZgK4R)
(https://i.ibb.co/q5PT9Sm/20210803-173609.jpg) (https://ibb.co/2NfGP9c)
(https://i.ibb.co/gFxQFd8/20210803-173623.jpg) (https://ibb.co/sJZcJC4)
(https://i.ibb.co/dgwgGDk/20210803-173635.jpg) (https://ibb.co/6B7BgFD)
(https://i.ibb.co/q1pY7gC/20210803-173641.jpg) (https://ibb.co/F7z4mYX)
(https://i.ibb.co/b3xQ8zY/20210803-173655.jpg) (https://ibb.co/QcZp1rh)
(https://i.ibb.co/cDMCrW8/20210803-173711.jpg) (https://ibb.co/bzq2K4v)
(https://i.ibb.co/3RQ2T13/20210803-173717.jpg) (https://ibb.co/cYV0yJB)
(https://i.ibb.co/8zjDKh4/20210803-173726.jpg) (https://ibb.co/RhCpv54)
(https://i.ibb.co/Pwx2LMQ/20210803-173751.jpg) (https://ibb.co/t8B0GzX)
(https://i.ibb.co/6tBBZbG/20210803-173904.jpg) (https://ibb.co/M166hpK)
(https://i.ibb.co/WfRNjqY/20210803-173913.jpg) (https://ibb.co/pdk65G9)
(https://i.ibb.co/4s8fvG7/20210803-173947.jpg) (https://ibb.co/CJbtCZz)
(https://i.ibb.co/Sxk6rH7/20210803-174002.jpg) (https://ibb.co/b346JYR)
(https://i.ibb.co/0JCGmqX/20210803-174259.jpg) (https://ibb.co/dKP5jBc)
(https://i.ibb.co/Ws8hHDj/20210803-174413.jpg) (https://ibb.co/0Q47nBv)
(https://i.ibb.co/H2rHx1M/20210803-174417.jpg) (https://ibb.co/BPgCrd7)
(https://i.ibb.co/7vrQvBk/20210803-174502.jpg) (https://ibb.co/qBmCBhJ)
(https://i.ibb.co/tZpQyXT/20210803-174527.jpg) (https://ibb.co/xmqXVHt)
(https://i.ibb.co/5K7ZD03/20210803-174610.jpg) (https://ibb.co/KK1nZPg)
(https://i.ibb.co/64WR8Sj/20210803-174624.jpg) (https://ibb.co/GV5v9Dz)
(https://i.ibb.co/HYg76dG/20210803-174637.jpg) (https://ibb.co/FJ762V8)
(https://i.ibb.co/NTHZqYL/20210803-174806.jpg) (https://ibb.co/Sf9RgvK)
(https://i.ibb.co/Dtbvs37/20210803-174819.jpg) (https://ibb.co/2y6CmXj)
(https://i.ibb.co/vVBSY99/20210803-174833.jpg) (https://ibb.co/8NBHckk)
(https://i.ibb.co/MCypF5t/20210803-210121.jpg) (https://ibb.co/0GpZHV6)
(https://i.ibb.co/hLzfWFv/20210803-210221.jpg) (https://ibb.co/YPsZkBG)
-
Very nice. It almost reminds me of the Bulgarian light refurbs but yours is a 41. The muzzle break changed early on in 41..... Due to the desire to reduce the noise for surrounding soldiers they went to the two port muzzle break but lost about 40 percent of the efficiency.... so rejoice yours wont kick as much and I think the shark gill look is kinda more cool.
-
Very nice. It almost reminds me of the Bulgarian light refurbs but yours is a 41. The muzzle break changed early on in 41..... Due to the desire to reduce the noise for surrounding soldiers they went to the two port muzzle break but lost about 40 percent of the efficiency.... so rejoice yours wont kick as much and I think the shark gill look is kinda more cool.
Soviet refurbs are very different from Bulgarian light refurbs. OP's rifle is a typical Soviet refurb. But it is a very nice example.
-
Got some more pictures. The patch on the R/H side is well done with a groove cut into the patch and slipped over the matching wedge cut in the stock. The only non matching part(s) are the Tula butt plate and magazine.
When did they transition from the 8 hole piston cover to the 7 hole?
Thanks, Bruce!!
IIRC, they started switching to 7-hole barrel shroud in Jan 1941, but did not complete until Mar/Apr 1941.
Based on your photos: trigger guard is from a later production with full serial stamped during refurb; bolt carrier is from a NKV 314 made SVT; gas cylinder is from a NKV 314 made SVT.
Since it's a Soviet refurb, it is 'naturally' a mixmaster.
BTW, is tip of gas regulator (gas nut) stamped with serial or last 2 digits of the serial?
and is right side of front sight base ep'ed a number?
-
Great looking rifle Bruce! Thanks for posting all the pictures! thumb1
I think this article by Oleg K. (Horilka) is the best source of current information available on the SVTs:
https://www.m9130.info/svt-40
7-hole shroud was introduced in January 1941 but could be found as late as March 1941, which is your Izhevsk (NKV 74) rifle’s manufacture month, as noted by pcke earlier.
Izhevsk never made the 2-hole muzzle brakes, so that’s a correct feature. The narrow stock is correct for your rifle.
-
pcke, oddly enough, the gas regulator is ep'd with 7?5 while the right hand of the sight base is stamped 70.
Jon, thanks for the link. I've read some of that article before but never down far enough. If so, I would have answered my own questions wink1.
-
pcke, oddly enough, the gas regulator is ep'd with 7?5 while the right hand of the sight base is stamped 70.
Jon, thanks for the link. I've read some of that article before but never down far enough. If so, I would have answered my own questions wink1.
Gas regulator may actually be ep'd with '705'. EP'd numbers on gas regulator and gas cylinder were added during refurb.
-
Test fired her before coming/going back to Colorado. She shot great on 1.3 setting, which is more than I can say for the first one I bought. Since I'm in Colorado with their mag restrictions, i brought her along. Totally forgot the SKS Paratrooper, but brought plenty of ammo for it fart1 wink1
-
Love it!
-
Sweet, Voluptuous, Tantalizing
-
Thanks Larry and Bob.