Author Topic: SKS rifles with AK-47 magazine capability  (Read 5038 times)

0 Members and 1 Guest are viewing this topic.

Online Justin Hell

  • Bubba/Purist Flip Flopper
  • BATTLEFIELD COMMISSION
  • Trade Count: (+3)
  • Sharp-Shooter
  • *
  • Posts: 1268
  • First Restore... Then Bubba.
Re: SKS rifles with AK-47 magazine capability
« Reply #40 on: January 06, 2018, 12:47:34 PM »
I think I found out what the mystery stock is. I believe it is a variety of the SKS stocks Fajen made. If you google Fajen SKS and scroll through the pictures you will see one that strongly resembles it. Don't bother clicking on it because it leads you to the otherboards site of unlinked photos....but you can see a pretty good look on google, for some reason it is still visible.

From what I have seen they vary quite a bit from stock to stock. They are pretty rare.  I believe they might have dumped unfinished 'stock' on the market...they pop up every now and then, nobody knows who made them...I have a pretty good idea.   This one likely was one of the ones I saw sell years ago for not much, the owner probably did all the uneven whittling and put in his own crossbolt. (Another thing I have only seen Fajen wood stocks utilize) Then finished it.  Other than internally, it looks pretty nice with a gun in it. :)

The one mentioned on the otherboards sold for $115 shipped.

I believe Fajen joined up with these guys https://www.macongunstocks.com.  There is a lengthy discussion about it over there...seems as if they might even still make these.I didn't want to read into it too much....missing photos bug me.

Mystery solved?  dntknw1
All Bubbas deserve bayonets....figure out a way.
SKS-files.com and SKSguide.com....because everything else is just piss....

Coming soon!  SKSparts.net

Offline LKermit

  • Trade Count: (0)
  • Cadet
  • *
  • Posts: 54
Re: SKS rifles with AK-47 magazine capability
« Reply #41 on: January 06, 2018, 04:06:53 PM »
https://www.google.com/search?q=Fajen+SKS+stocks&client=firefox-b&sa=X&biw=1148&bih=596&tbm=isch&source=iu&ictx=1&fir=mzGBqhR5r1egtM%253A%252Ct5a4EMZPcTu58M%252C_&usg=__UqmMazmsZdDcyjQSMeexIFtPOLA%3D&ved=0ahUKEwj1mfW_nMTYAhUE9YMKHT-yDqUQ9QEILzAC#imgrc=mzGBqhR5r1egtM:

Is this it?  It does have some similarities, but without a look at the Fajen inletting work,I will say, No Cigar.  My side by side pics pretty much show the same tool marks and hand-cut wavy cuts as the standard Chinese carvers used, except the mass produced stocks and the thumb hole stocks were mostly much better quality.

Thanks for a very interesting angle and information.  I will follow up to see where it may lead.The very last thing I desire is to cheat or mislead anyone.

Kermie
the v

Online Justin Hell

  • Bubba/Purist Flip Flopper
  • BATTLEFIELD COMMISSION
  • Trade Count: (+3)
  • Sharp-Shooter
  • *
  • Posts: 1268
  • First Restore... Then Bubba.
Re: SKS rifles with AK-47 magazine capability
« Reply #42 on: January 07, 2018, 11:21:02 AM »
Yep that's the one I saw that was the most similar.  They seemed to do a few different designs. My 49 actually had one the previous owner separated from it that was one of those rainbow stained types.

The reason I suspect it is one of theirs is the inletting, several similar to this, but not identical...have been sold in unfinished form...still needing inletting as well as finishing the wood. The Macon outfit that Fajen seems to have joined up with doesn't offer SKS stocks, I suspect there was some old stock that may have been sold off in bulk, or just a fire sale and a few made it into the wild. The beaver chew inletting on yours makes me think someone did the best they could with what they had to work with. I know I would have a tough time getting that inletting right.

The one in the google pic doesn't have the larger cheekrest, but it does have the Sporter type fat forend...and they all seem to use the crossbolt. The way yours looks doesn't seem to jive with China doing it. That crossbolt section is the roughest area...which is a crucial area for proper fitting. It seems as if they were going to go all out and make such a fancy version of a stock they were already making they would have  done at least a typical job on the inletting too.   

I suppose you could send the Macon guys photos and ask if Fajen remembers this type and/or if he suspects it is one of his.
All Bubbas deserve bayonets....figure out a way.
SKS-files.com and SKSguide.com....because everything else is just piss....

Coming soon!  SKSparts.net

Offline LKermit

  • Trade Count: (0)
  • Cadet
  • *
  • Posts: 54
Re: SKS rifles with AK-47 magazine capability
« Reply #43 on: January 07, 2018, 06:53:23 PM »
Yep that's the one I saw that was the most similar.  They seemed to do a few different designs. My 49 actually had one the previous owner separated from it that was one of those rainbow stained types.

The reason I suspect it is one of theirs is the inletting, several similar to this, but not identical...have been sold in unfinished form...still needing inletting as well as finishing the wood. The Macon outfit that Fajen seems to have joined up with doesn't offer SKS stocks, I suspect there was some old stock that may have been sold off in bulk, or just a fire sale and a few made it into the wild. The beaver chew inletting on yours makes me think someone did the best they could with what they had to work with. I know I would have a tough time getting that inletting right.

The one in the google pic doesn't have the larger cheekrest, but it does have the Sporter type fat forend...and they all seem to use the crossbolt. The way yours looks doesn't seem to jive with China doing it. That crossbolt section is the roughest area...which is a crucial area for proper fitting. It seems as if they were going to go all out and make such a fancy version of a stock they were already making they would have  done at least a typical job on the inletting too.   

I suppose you could send the Macon guys photos and ask if Fajen remembers this type and/or if he suspects it is one of his.

Grrrrreat idea.  Will do so and share!

Kermie

Offline LKermit

  • Trade Count: (0)
  • Cadet
  • *
  • Posts: 54
Re: SKS rifles with AK-47 magazine capability
« Reply #44 on: January 08, 2018, 11:42:00 AM »
Justin, your tip was more productive than either one of us could have reasonably expected.

I made contact with a very nice man who, in the past has worked for both E. C. Bishop and Rhinehart Fajen.  He still works in Missouri, for yet another stock making company, and agreed to do an interview, and is available most any time.  He stated that both firms are currently owned by Larry Potterfield, and neither company is still in business.

I am planning a trip to Missouri in the next few weeks to pick up a rather large electric riser chair to aid my disability, so I might be able to meet up with someone who could do a proper, maybe even a video (!) interview.  If I am able to work out details, I would love to get this done.

The man seemed agreeable to do this, and was very friendly and affable.  I sent an e-mail early this morning, and he replied with a phone call within four hours of my dispatch.  I feel like he has all the details, and is itching to set them straight.  What a golden opportunity for the right person or persons.

If anyone would be available in the Harrisonville, Peculiar, or Belton Missouri area, please get in touch with me ASAP.  This is just too good to miss!  405-519-3352 or lkermit61@gmail.com

A hop(e)ful Green Frog.

Online Justin Hell

  • Bubba/Purist Flip Flopper
  • BATTLEFIELD COMMISSION
  • Trade Count: (+3)
  • Sharp-Shooter
  • *
  • Posts: 1268
  • First Restore... Then Bubba.
Re: SKS rifles with AK-47 magazine capability
« Reply #45 on: January 09, 2018, 09:42:41 AM »
Cool!
Glad I suggested it...hopefully that will pan out and we can learn a little. :)
All Bubbas deserve bayonets....figure out a way.
SKS-files.com and SKSguide.com....because everything else is just piss....

Coming soon!  SKSparts.net

Online Loose}{Cannon

  • Administrator
  • Trade Count: (+14)
  • Sniper
  • *
  • Posts: I am a geek!!
  • Constitutional Extremist
Re: SKS rifles with AK-47 magazine capability
« Reply #46 on: January 09, 2018, 10:36:39 PM »
Cool deal...


So, a fajen eh...    I saw one on ebay like 7 years ago that was a walnut and a completely different design.  I also recall it needing 'some' finishing inside and out. I wanted it badly at the time.  Cool stock!
      
1776 will commence again if you try to take our firearms... It doesn't matter how many Lenins you get out on the street begging for them to be taken.